- Preparation
The CNC turning and milling composite processing manufacturer introduced the process requirements of typical parts and the batch of processed workpieces. The function that the CNC lathe should have is to make preparations and the prerequisites for the reasonable selection of CNC lathes. Meet the process requirements of typical parts
The process requirements of typical parts are mainly the structural size, processing range and accuracy requirements of the parts. According to the accuracy requirements, that is, the dimensional accuracy, positioning accuracy and surface roughness of the workpiece, the control accuracy of the CNC lathe is selected.
Choose based on reliability. Reliability is a guarantee for improving product quality and production efficiency. The reliability of a CNC machine tool means that the machine tool runs stably for a long time without failure when it performs its functions under specified conditions. That is, the mean time between failures is long, even if there is a failure, it can be restored in a short time and put into use again. Choose machine tools with reasonable structure, well-manufactured, and mass-produced machines. Generally, the more users, the higher the reliability of the CNC system.
- Purchase of machine tool accessories and tools
According to the analysis of CNC turning-milling composite processing manufacturers, the machine tool accessories, spare parts and their supply capacity, and cutting tools are very important to the CNC machining and turning centers that have been put into production. When choosing a machine tool, carefully consider the compatibility of tools and accessories.
- Focus on the identity of the control system
Manufacturers generally choose products from the same manufacturer, and should at least purchase control systems from the same manufacturer, which brings great convenience to the maintenance work. Teaching units require students to be knowledgeable and knowledgeable, so it is a wise choice to choose different systems and equip them with various simulation software.
- Choose according to the performance-price ratio
Introduced by CNC turning-milling composite machining manufacturers, to ensure that the functions and accuracy are not idle, not wasted, and do not choose functions that are not related to your needs.
Copyright notice: This article comes from https://lasercutting-service.com/
Please keep the source and address of this article for reprinting: https://lasercutting-service.com/cnc-turning-and-milling-composite-processing-manufacturers-explain-the-selection-of-lathes/